--- title: "Dise Player V1.3" slug: "dise-one-v13" updated: 2025-04-28T09:21:42Z published: 2025-04-28T09:21:42Z canonical: "support.dise.com/dise-one-v13" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.dise.com/llms.txt > Use this file to discover all available pages before exploring further. # Dise Player V1.3 ## Chromium Version **Chromium 122** - Windows - Linux Ubuntu 20, 22, 24 - Linux INSM D03 & E10 **Chromium 99** - Linux INSM F23 **Chromium 86** - Linux INSM F22 ## Features **Tizen 5 & 7 Support** You can now run Dise on Samsungs Tizen 5 & 7 devices. Make sure you have the latest firmware. **Display Layout on Windows** There is now an custom settings to disable the display layout controls and allow Windows to handle it instead. One.Display = "windows". **Synchronization in the CX Portal** Easily set up a sync group in the CX portal using zones in locations and have one display be the leader and rest of the displays able to follow on a channel per channel basis. **Share of Voice** Share of voice channel mode in the CX portal is now supported. **New Application Launch Parameters on Windows** There is now options to disable the escape key during playback --no-esc-to-exit. **Nightly Reboot** The player will now be rebooted at 04:00 local time. **Added setting to disable client alarms** One.FilterClientAlarms can be used to disable all or specified client alarms. **Added Setting to Toggle On-Screen Keyboard** One.OnScreenKeyboard can be used to toggle the onscreen keyboard on or off. ## Improvements **Player Settings** Player settings are now persisted on disc to ensure that not lost during software updates. **Enable Info Button on Tizen** The info button on the remote control will now open the Dise Control Center. **Windows Display Settings** Improved the handling of Windows display settings so the player will restore Windows display settings when screens are disconnected and reconnected again. **Improved Sync Performance on Tizen** Improvements have been made to increase the speed a Tizen device will switch between follower mode and fallback mode. **Hardware Info for Windows and Linux** Player, client and software versions are now reported to the portal, including the Chromium version. **MQTT Server URL Custom Setting** A new [custom setting](/dise/docs/custom-settings) - One.MqttServerUrl - has been added to allow a specific MQTT server to be used for synchronized playback. **Log File Clean Up** The oldest log file will be deleted if there is less than 200MB space left in storage. **Detect DRM Changes on Linux and Windows** DRM change/add/remove events are now detected to trigger display changes. **INSM F23 Improved Video Playback** CSS for loading video has been optimized for video playback on F23 devices. **Improved COM Support** The COM port name can now be specified to force the player to use that port. The number of COM ports the player supports has also been increased to 10. ## Fixes - Driver used in F23 units has been adjusted to improve hardware video playback acceleration. - Fixed an issue where conditions was using UTC instead of local time settings in the playout. - Fixed an issue that could cause the player be offline and not try and reconnect to the network. - The pairing screen will now only show on the primary display. - Fixed an issue where interactivity would be accepted by playback when the screen is off. - Fixed an issue where UTC timezone was used for conditions and scenarios instead of local timezone. - Fixed an issue where weekday conditions would play on the wrong day. - Fixed an issue where players wouldn't connect to the portal if the player starts offline. - Fixed an issue where button browser on Windows did not work. - Fixed an issue where weather conditions wouldn't work as expected. - Fixed an issue where Tizen would not respond to the timezone set in the CX portal. - Fixed an issue where volume didn't update once changed in the portal. - Fixed an issue where a player restart was needed when a channel was changed in the CX portal. - Fixed an issue where custom settings would only take effect after a manual player reboot. - Fixed an issue where a failed WAMP connection on player start would block content updates. - Fixed an issue where if the player failed to retrieve a pairing code it would need to be restarted before retrying instead of continuously retrying. - Fixed an issue where Tizen devices wouldn't respond to operating hours. - Factory reset now works as expected on Tizen. - Fixed an issue where the control center wouldn't always load on Windows. - Fixed an issue where operating hours wouldn't work as expected. ## Known Issues - Time zone and date & time settings configured in the portal doesn't work on Windows. - Limited time zone options that work on Tizen. - Reboot time currently locked to 04:00:00 with no way of changing it in CX Portal. - F23 devices using One 1.2 Linux must be re-paired after updating to 1.3. - If the player starts offline, proof of play may not be recorded until the player reconnects. If a player starts online and then goes offline, statistics will be recorded during the offline period.