--- title: "Samsung E-paper" slug: "samsung-e-paper" updated: 2026-11-16T15:56:56Z published: 2026-11-16T15:56:56Z canonical: "support.dise.com/samsung-e-paper" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.dise.com/llms.txt > Use this file to discover all available pages before exploring further. # Samsung E-paper The Colour E-Paper EMDX series consists of thin, lightweight displays designed for low-power operation. The displays provide a paper-like viewing experience and are intended for use cases where content remains static for extended periods. Unlike traditional digital signage, e-paper has different operational requirements, particularly around content updates, power management and device connectivity, which should be considered when planning an installation. When deploying e-paper displays, the following best practices should be considered to optimise performance, battery life and overall reliability. - Prioritise static content: E-paper is best suited to displaying static content that remains unchanged for extended periods. - Minimise content updates: Keep content updates infrequent to reduce power consumption and maximise battery life. - Consider device sleep behaviour: Displays typically enter a low-power sleep state between scheduled wake intervals and may appear offline during this time. - Avoid frequent content changes: E-paper is not designed for regularly changing or dynamic content. Use cases requiring frequent updates should be avoided. - Optimise wake intervals: Configure longer intervals between device wake windows to minimise power consumption and extend battery life, while balancing content update requirements. - Consider ambient lighting: Assess the lighting conditions at the installation location to ensure content remains clearly visible and readable, particularly in low-light environments. ## Pre-requisites - Make sure a Wi-Fi network is available. - Use a mobile device with Android 10 or later, or iOS. - Install the Samsung E-paper mobile app from the Play Store or App Store. - Keep the e-paper device powered on. You will need its QR code or pairing code, shown on the device screen. ## Installation ### Add the device Open the mobile app and choose one of these methods: #### Scan the QR code 1. Tap **Add Device**. 2. Scan the QR code displayed on the e-paper device. 3. Continue to the network setup steps. #### Enter the pairing code 1. Tap the **+** icon on the app home screen. 2. Choose **Pair**. 3. Enter the pairing code displayed on the e-paper device. ### Connect to Wi-Fi 1. Choose the Wi-Fi network you want the device to use. 2. Enter its password. 3. Accept the terms and conditions. Do not skip this step. 4. Complete the initial setup. The custom app will not install during this step. ### Configure the device 1. Choose **Manual Setup**. 2. Select the device orientation. 3. Set the device’s sleep mode. 4. Set the content refresh time. To help protect the panel, choose when the content should refresh. 5. Choose **Custom** and enter the app URL. 6. Set the device security PIN. 7. Enter a device name. ### Install the custom app 1. Press **Install**. 2. Wait for the custom app to install on the device. ### Check device information or reset it 1. In the mobile app, open the **System** tab. 2. Select **Device settings**. 3. Choose an option to view information such as network status, date and time, or firmware details. 4. To reset the device, choose **Reset All**. ### USB Preset A USB preset can be used to set-up the display to a consistent configuration. Please refer to the manufacturer for guidance or contact our Support team for further information and assistance. ## Device Controls | Button | Action | | --- | --- | | Power | Press: Wake | | | Hold: Power off | | Mode | Press: Next image | | | Hold: Toggle Auto/Manual mode | | Pairing | Hold: Enter pairing mode | | Mode + Pairing | Hold: Reset device | ## Wake Custom Settings Wake settings should be configured via [custom settings](/dise/docs/custom-settings) to control an E-paper’s wake settings: - Trigger wakeup after a specified number of minutes: - `One.WakeUpAfterMinutes` - Set the duration for the display to stay awake and idle before entering sleep: - `One.StayAwakeDuration` ## LED Status | LED | Status | Description | | --- | --- | --- | | Red | On | Charging in progress | | | Off | Charging complete | | Blue | On | Bluetooth pairing complete | | | Blinking | Bluetooth pairing discovery | | Green | On | Copying from USB device | | | Blinking | Display is on, changing modes, software update in progress |