Nexmosphere

Connect a Nexmosphere Device to Dise

Premium

CX Composer

Scripts

Connect the Nexmosphere device to a Premium player using the relevant COM port:

import serial ser = serial.Serial( port='COM3',\ baudrate=115200,\ parity=serial.PARITY_NONE,\ stopbits=serial.STOPBITS_ONE,\ xonxoff=True,\ bytesize=serial.EIGHTBITS,\ timeout=0) print("connected to: " + ser.portstr) count=1

Read the signal commands being sent:

for line in ser.read(): time.sleep(0.5) packet = ser.readline() packet_clean = (packet.decode('utf').rstrip()) print(packet.decode('utf').rstrip())

Close the termite connection before starting Dise. Only one connection can be opened over a single COM port at any time.

Control Dise Using the Nexmosphere Device

Use triggers within a script to control what content plays.

The Dise methods library can be used in the script for further controls.

Connect the script to the media player by adding it to a Dise movie.

Upload the Dise movie to the CX Portal

Run the script as a background or transparent layer.

Example script:

import serial
import time

loglevel = 'Warning'

#Connects to the serial port, Port can change to something else but the rest should be ok if using Nexmosphere
ser = serial.Serial(
    port='COM3',\
    baudrate=115200,\
    parity=serial.PARITY_NONE,\
    stopbits=serial.STOPBITS_ONE,\
    xonxoff=True,\
    bytesize=serial.EIGHTBITS,\
        timeout=0)

#Prints out what port we are connected to
print("connected to: " + ser.portstr)
count=1


while DISEScript.ProcessEvents(1000) != 'Terminated':
    for line in ser.read():
        
        #Checks that the script is running and looking for packages
        DISEScript.Log(loglevel, 'Looking for relevant packages!')
        
        #Slows down the read of the packages to not overload the script, can be adjusted and probably lowered a bit for faster triggering
        time.sleep(0.5)
        
        #Reads the package and puts it in the variable 'Packet'
        packet = ser.readline()

        #Cleans the packet by decoding it as utf for readability
        packet_clean = (packet.decode('utf').rstrip())

        #Uncomment line below to see all packets that come in. 
        #DISEScript.Log(loglevel, packet.decode('utf').rstrip())

        #Triggering part of the script, change the packetname to trigger based on different events on the Nexmosphere board
        #Can use the logging part above to log all packets to see what the name for the different packets are and just read that in diselog
        #Disescript.settrigger toggles the trigger set on player, "MAGNETIC_SENSOR" for example. Needs to be changed to the name of your triggers

        #Triggers based on the Magnetic pick-up sensor, [7] is when you detach it [4] is when you put it back. On [4] we trigger the image off
        if packet_clean == '003A[7]':
            DISEScript.SetTrigger("MAGNETIC_SENSOR", True)
        if packet_clean == '003A[4]':
            DISEScript.SetTrigger("MAGNETIC_SENSOR", False)

        #Trigger based on the RFID sensor, 007A[0] is if it is put on the senor and the [1] is if it has been removed and then we trigger off
        if packet_clean == '007A[0]':
            DISEScript.SetTrigger("RFID_1", True)
        if packet_clean == '007A[1]':
            DISEScript.SetTrigger("RFID_1", False)

        #Trigger based on the Buttons Clicking the left button will trigger it on, clicking the right button will trigger it off
        if packet_clean == '001A[17]':
            DISEScript.SetTrigger("BUTTON", True)
        if packet_clean == '001A[3]':
            DISEScript.SetTrigger("BUTTON", False)

        #Trigger based on the Light sensor, lifting it will trigger it on and putting it back will trigger it off
        if packet_clean == '006A[3]':
            DISEScript.SetTrigger("LIGHT_SENSOR", True)
        if packet_clean == '006A[0]':
            DISEScript.SetTrigger("LIGHT_SENSOR", False)
        
ser.close()