Samsung on Lite

Lite

1. Run initial screen set up, including firmware, power settings, date/time and any other additional settings.
2. Select 'URL Launcher' (Menu->System->Play Via->URL Launcher).
3. Select 'Install Web App'.
4. Type in the URL for the relevant OS:
   1. http://go.dise.tv/sssp4 
   2. http://go.dise.tv/sssp5 
   3. http://go.dise.tv/sssp6 (this link should be used for SSSP7 screens)
   4. http://go.dise.tv/sssp10
5. A reboot may be needed to complete the installation.
6. A Dise pairing code will show once installation is successful.
7. Create a Display in the CX portal.

Lite Tizen 7

1. Select 'custom app' on the PlayerSelection menu and enter the installation URL: http://go.dise.tv/tizen7
2. Once complete, press the home button and select Custom app.
3. A Dise pairing code will show once installation is successful.
4. Create a Display in the CX portal.

Installation from USB

1. Download the latest USB Tizen zip file.
2. Create a 'SSSP' folder on a USB drive.
3. Extract the files contained in the Tizen zip file to the 'SSSP' folder.
4. Insert USB into screen
5. Click the 'Content'/'Home' button on the remote.
6. Select 'URL Launcher settings'.
7. Select 'Install from USB Device'.
8. Enter your PIN (default is 1234).
9. A reboot may be needed to complete the installation.
10. A Dise pairing code will show once installation is successful.
11. Create a Display in the CX portal.

Gapless

A custom setting is required on SSSP4 and SSSP6 devices to achieve gapless playback and to play 4K content:

• Name: GaplessVideo
• Type: Bool
• Value: 1

Debug Overlay

Press '1' on the screen's remote or connect a keyboard and press '1' to show the debug overlay:

1. Player information.
2. Player log.
3. Player settings:
   1. 'Clear log' - Clear debug overlay of logs.
   2. 'Clear settings' - Delete all Dise settings and generate a new pairing code.
   3. 'Clear content cache' - Delete all content and re-download playlist.
   4. 'Reload' - Restart Dise.
4. Display log level - Set what level of logging is shown on the overlay. By default this is set to the highest level 'debug'.