Displays & Players

Navigate to 'Displays' in the left menu: 🔎︎ Click 'Create a display': 3. Enter the pairing code shown on the media player. A media player's MAC address can be used instead of a pairing code. 4. Enter a name for the display. 5. Select ...

Edit the location, layout, channels and tags of a display: Navigate to 'Displays' in the left menu: 🔎︎ Select a display. Click 'Edit' under the relevant section: Zone - Change the location within the structure. Change the layout. Change th...

Dise One Connect multiple screens to one player and control the content on each screen via the CX Portal with layouts. Connect all screens to the media player. Create a display . Create a layout. Set the layout to the full resoluti...

Premium Connect multiple screens to one player, each with their own display on the CX Portal. A separate instance of Dise running on each screen. Output Settings on Player With the Dise Control Center open, navigate to the Windows system tray: ...

The display view contains a full list of all displays under the selected brand. Important information including the latest heartbeat, display location and channel can be viewed from this list. List View A live screenshot directly from the media ...

Operating hours can be used to stop content playing outside of specified hours. The behavior will be different depending on the hardware, e.g. Dise will turn the backlight off on a SoC screen outside the set operating hours. Enable Operating Hours&...

Screen control can be used to control a screen that’s connected to an external media player via RS232 into standby. Screen control will: Force the screen on when inside operating hours . Force the screen off when outside operating hours ...

Navigate to 'Displays' in the left menu: 🔎︎ Select a display. Click the power icon under the display screenshot: 4. Select an option: 🔎︎ a. Reload - Close and re-open the Dise player software. b. Reboot - A full power restart of t...

Add a Custom Setting Navigate to the 'Players' module: 🔎︎ This can also be done via the 'Displays' module by selecting a display and clicking on the player name: 🔎︎ Select the relevant player. Select 'Add new' under custom settings: 🔎︎ ...

Add a Custom Setting Navigate to the 'Players' module: 🔎︎ This can also be done via the 'Displays' module by selecting a display and clicking on the player name: 🔎︎ Select the relevant player. Select 'Add new' under custom settings: 🔎︎ ...

Synchronization on Dise One can be done via the local network (TCP/UDP) or via the internet using MQTT over HTTPS. Synchronized players will auto discover. Players are synchronized per layer. Synchronization is leader/follower based. Syn...

Premium players on the same local network can be synchronized if either of these conditions are met: Players are playing the same content. The duration is the same for all playlist items across all playlists. Add Sync Custom Setting Add t...

Setting up a premium LED panel/module involves considering factors such as resolution, graphic card output, and the LED processor/sending card. LED displays have lower individual resolutions but can achieve higher total resolutions. The graphic card...